Even when you are confronted with a full-blown infestation of these parasites in your home, you cannot help but get overwhelmed by the same. Vacuuming happens to be one of the simplest and most efficient techniques used to eradicate bed bugs from different surfaces. However, after you have dusted the vacuum used in eradicating bed bugs it is essential to adequately clean the device to subsequent infestation denial and continued efficiency. In this article, we will explain how to clean your vacuum after vacuuming bed bugs in Richmond Hill, to prevent the spread of these bugs throughout your house.
- Empty the Vacuum Canister or Bag
The first step of vacuum cleaning after the process of bed bug eradication is to dispose all the contents held within the canister or the bag. Bed bugs can easily hide in the dust and other debris that are found on carpeted or upholstered floors when vacuuming. If your vacuum has a bag, make sure that you tie the bag tightly before throwing it into a plastic bag of its own, so that none of the bedbugs can escape. If you are dealing with a canister-based vacuum, then you will need to discard of its content with a sealed bag. Remember to always dispose of the bag or the canister in the outside part so that any bed bug might not escape.
- How to clean and disinfect the Vacuum Filters
While most vacuums come with screens over the intake which helps in trapping micro particulate matters, these screens and any other materials fitted around openings can capture bed bugs and their eggs. These filters should also be cleaned and disinfected to see that no bed bugs are left behind within the room. To clean the vacuum filters, refer to the user manual for the right procedure on how to accomplish this. Usually, warm water with soap can be used to wash washable filters other products could be hosed down or submerged in water containing detergent. When the filters are wet it is recommended that they be allowed to dry before being placed back in the vacuum. Non-washable filters must be cleaned using the brush part of the vacuum cleaner and no began brushing. That way it can be cleaned but you might also want to use a disinfectant wipe to ensure it is cleaned.
- Clean the Vacuum Hose and Attachments
Bed bugs prefer to hide in the holes and corners of the vacuum hose and the attachments, this part need a good washing as well. Remove the hose and then clean the inside using a vacuum hose brush or a soft cloth which will remove anything stuck in the hose. If the manufacturer advises it, the hose can also be washed. For tools such as the crevice tool, upholstery brush and a floor head, wipe these with a disinfect wipe or wash with warm water soap. Make sure that all of the mentioned parts are dry before reassembling them back to your vacuum.
- Use Heat to Kill Remaining Bed Bugs
The best way of getting rid of bed bugs after vacuuming your home is through the use of heat. Bed bugs cannot endure high temperature that is why by applying heat to the vacuum, all the rest of the bugs and their eggs can be gotten rid of. It is safe to bring the temperature up high while you blow dry the vacuum hose and its attachments. However, there are some vacuums that are built with heat and you can leave your vacuum outside in the sun for some time, but this can only be done on a warm day in Richmond Hill. If possible, leave your vacuum in the car and run it for several hours to ensure all the possible bed bugs are dead.
- Disinfect the Vacuum Exterior
It was also making me aware of other aspects of my life that I was not cleaning such as washing hands before handling the vacuum cleaner as the inner side was cleaned you are wiping the outer part of the vacuum, this is grimy. You should use the disinfectant wipes or a cloth that has been wet in water and disinfectant to wipe out all the surface of the vacuum. This will act as a good way of ridding all the bedbugs or eggs that may still be found clearly on the exterior parts, the wheels, the handles and body of the rolling luggage. Especially as a reminder to be cautious when the outline could have seams or crevices that are perfect for bed bugs.
- Store the Vacuum Properly
Lastly after washing and disinfecting your vacuum you should keep it in its safe enclosed place to avoid any possibility of re-contamination. Do not put the vacuum right on the floor since the bed bugs can easily drag themselves into the vacuum in case it is placed on the ground. Place it in a plastic bin or in a high shelf where it will not be exposed to possibilities of re infestation.
Conclusion
After giving vacuum bed bugs in Richmond Hill, it is important to sanitize it in a way that the bugs do not spread to the other parts of your house. One can practically take every single bed bug in the vacuum through canister or bag emptiness, washing, and rinsing filters and attachments, use of heat, and vacuum casing in the sanitize position. In this process you have the guarantee that your vacuum is always with you a safe and efficient weapon against bed bugs.